MIL-C-5778D
(Unless otherwise indicated, copies of commercial item descriptions are available
from: Standardization Documents Order Desk Bldg. 4D, 700 Robbins Avenue Philadelphia,
PA 19111-5094)
.
* 2.2 Non-Government publication. The following document(s) form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of
the documents which are DoD adopted are those listed in the Issue of the DODISS cited
in the solicitation. Unless otherwise specified, the issues of documents not listed
in the DODISS are the issues of the documents cited in the solicitation (see 6.2).
American Society for Testing and Materials (ASTM)
ASTM D 3951 Standard Practice for Commercial Packaging
(Application for copies of this ASTM should be addressed to American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1183).
2.3 Order of precedence. In the event of a conflict between the text of this
document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
REQUIREMENTS
3.
3.1 First article. When specified (see 6.4), a sample shall be subjected to
first article inspection (see 6.4) in accordance with 4.4.
3.2 General.
In addition to the requirements herein, the requirements specified
on the drawings
for covers for the particular model of aircraft shall also apply.
3 3 Materials. Materials shall be as specified herein. Where materials are not
specifically designated, they shall be designed or selected to be suitable for the
purpose.
Fabric Material.
3.3.1.
3.3.1.1 TPYE I. Unless otherwise specified, Type I materials shall be as
specified in 3.3. 1.1.1 thru 3.3.1.1.4.
3.3. 1.1.1 Transparent plastic canopies. Material conforming to MIL-C-10799 shall
be used in the covers for transparent plastic canopies such as the bombardier and
pilot compartments, nose section, turrets and sight blisters.
3 3.1.1 2 Engine covers. Material for engine covers shall conform to
MIL-C-10799, type II, class 4.
3.3. 1.1.3 Warning streamers. Naming streamers, when specified (see 6.2), shall
be in accordance with MS51700-12. The streamers shall be long enough to permit at
least a 12 inch length exposure when the cover is installed on the aircraft.
3. 3.1.1.4 All other covers.
For covers not specified in 3 3 1.1.1 thru
3.3.1.1.3, the material shall conform to CCC-C-419, type III, 12.29 ounces per square
yard. The material shall be finished in accordance with CCC-D-950, type I, class B.
3.3.1.2 Type II
Unless otherwise specified (see 6.2), the material for type II
covers shall conform to MIL-C-20696, type I, class 2. Warning streamers shall be the
same as for type I.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business