MIL-J-26149E
5.3 required
Physical protection. Cushioning, blocking, bracing, and bolting as shall be in accordance with MIL-STD-1186. Except for domestic
shipments, waterproofing requirements for cushioning materials and containers
shall not be waived. The drop tests of MIL-STD-1186 shall be waived when preservation, packaging, and packing of the Item are for immediate use or when
the drop tests of MIL-P-116 are applicable.
5.4 Shipment marking. Interior and exterior containers shall be marked in accordance with MIL-STD-129.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory).
6.1 Intended use. The jacks covered by this specification are intended for use on aircraft weapon systems. These aircraft jacks shall be used for normal and random maintenance tasks, emergency repair, component or equipment replacement, functional tests of general inspection.
6.2 a.
b. c.
d. e. f.
g.
h. i.
Ordering data. Procurement documents should specify the following:
Title, number and date of this specification and the type of jack defined per Table 1.
Issue of DODISS to be cited in the solicitation, and If required, the specific issue of individual documents referenced (see 2.? and 2.2).
The capacity of the jack required and the type of jack to be provided (Landing gear (Axle), Cantilever, or Airframe (Unipod or Tripod) (see 3.6.4 & 3.18).
That mobility per MIL-STD-1784 shall be used as required in 3.6.6. Conditions for first article testing (see 4.3.1).
Level of preservation, packaging, and packing (see 5.1 and 5.2).
Designate the specific type of hydraulic fluid to be used in preparation for delivery (see 5.1.1.1).
Finish, coating and Color per table III.
Provide for a connection to an external pumping source if required
(see 3.8.7).
25
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business