MIL-T-85075A(AS)
(Copies of specifications, standards, handbooks, drawings and publications
required by manufacturers in connection with specific acquisition functions
should be obtained from the contracting activity or as directed by the
contracting officer.)
2.2 Other publications. The following document(s) form a part of this
specification to the extent specified herein. Unless otherwise specified, the
issues of the documents which are DoD adopted shall be those listed in the
issue of the DoDISS specified in the solicitation. Unless otherwise
specified, the issues of the documents not listed in the DoDISS shall be the
issue of the nongovernment documents which is current on the date of the
solicitation.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
9633-78
Electrodeposited Coatings of Zinc on Iron and Steel,
Specification for
AMS 5643
Steel Bars, Forgings, Tubing and Rings, Corrosion Resistant
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
2.3 Order of precedence. In the event of a conflict between the text of
this specification and the references cited herein (except for associated
detail specifications, specification sheets or MS standards), the text of this
specification shall take precedence. Nothing in this specification, however,
shall supersede applicable laws and regulations unless a specific exemption
has been obtained.
REQUIREMENTS
3.
3.1 Specification sheets. The individual item requirements shall be as
specified herein and in accordance with the applicable specification sheets.
In the event of any conflict between requirements of this specification and
the specification sheet, the latter shall govern.
3.2 First article. When specified in the contract or purchase order (see
4.3 and 6.2.1), the contractor shall furnish sample tie down assemblies for
first article inspection(s) and approval. A new contractor, supplier, or
manufacturer shall be required to complete a first article inspection (4.3).
3.3 Materials. Materials used in the manufacture of tie down assemblies
shall be of aircraft quality, suitable for the purpose, and shall conform to
applicable Government specifications. Materials conforming to contractor's
specifications may be used, provided they are equivalent to Government
specifications with respect to operating characteristics and that a savings in
weight or cost can be accomplished. Contractor's specifications must be
satisfactory to the Government and contain provisions for adequate tests as
specified herein. The use of contractor's specifications will not constitute
waiver of Government inspection.
3.3.1 Metals. All metals shall be compatible with the intended
temperature, functional, service and storage conditions to which the
components will be exposed. The metals shall possess adequate corrosion
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business