3.17 Color
3. 17.1 Component colors. All parts or components of the slings, except the
hoist attachment, wire cables, fabric or webbing, and the lifting attachments,
shall be semigloss green color number 24052 in accordance with FED-STD-595.
3 . 1 7 . 2 Color of webbing. The color of the webbing shall be as manufactured
unless a special application is mandated which would require a specific color.
All warnings, cautions, or
3 . 1 7 . 3 Color of warnings or instructions.
restrictions for safe operation shall be red, color number 38905, in accordance
with FED-STD-595. All other markings shall be black, color number 37038, in
accordance with FED-STD-595.
l
3 . 1 8 Identification of product.
Equipment, assemblies, and parts shall be
marked for identification in accordance with MIL-STD-130. Each sling shall also be
tagged with the established proof load test data. (see proof load test tag,
4.10.1.1).
2 . 1 9 Packaginq, handling, s t o r a q e and transportability. Packaging, handling,
storage, and transportability shall be developed in accordance with MIL-STD-1367.
Level AA packaging data shall be developed and coded in accordance with
MIL-STD-2073-2.
3.20 Workmanship. The slings, i n c l u d i n g all parts and accessories, shall be
fabricated and finished in a thoroughly workmanlike manner. Particular attention
shall be given to freedom from blemishes, defects, burrs, and sharp edges; accuracy
of dimensions, radii of fillets, and marking of parts and assemblies; thoroughness
of welding, b r a z i n g , painting, and riveting; alignment of parts and tightness of
assembly screws, a n d bolts; et cetera.
3.20.1 Dimensions and tolerances. Dimensions and tolerances not specified
shall be as close as is consistent with the best shop practices. Where dimensions
and tolerances may affect the interchangeability, operation, or performance of the
s l i n g s , they shall be held or limited accordingly.
*
3.20.2 Stitching Webbing Assemblies. The required webbing or fabric shall be
assembled with the required stitch patterns, stitches per inch and size and type of
threads.
There shall be no loose top threads nor shall there be any excessively
tight stitching resulting in the puckering of the materials sewn. Thread end shall
be trimmed and the lock embedded in the materials sewn. When necessary over-
stitching or backstitching shall be used to assure seam strength.
3 . 2 0 . 3 I n s p e c t i o n , I n all respects, the workmanship shall be acceptable to
the responsible assigned Inspector (for the Navy, the NAVPRO).
4.
QUALITY ASSURANCE PROVISIONS
*
4 . 1 Responsibility for Inspection.
Unless otherwise specified in the
contract or purchase order, the contractor is responsible for the performance of
all Inspection requirements (examinations and tests) as specified herein. Except as
otherwise specified in the contract or purchase order, the contractor may use his
own or any other facilities suitable for the performance of the inspection
requirements specified herein, unless disapproved by the Government. The
Government reserves the right to perform any of the Inspections set forth in the -
specification where such inspections are deemed necessary to ensure supplies and
services conform to prescribed requirements.
110p10" style="font-size:13px">10
Downloaded: 2014-09-29T10:08Z
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business